Yes. PU mesh panels can be installed on many existing Stack Sizer machines, provided the panel dimensions, fixing arrangement, tensioning system and aperture specification match the existing equipment. Stack Sizer machines already use polyurethane screening media, so the question is not whether PU can work but whether a specific alternative panel fits a specific deck. Confirm machine model, panel dimensions, edge profile, tensioning direction, aperture size and polyurethane formulation before ordering, and trial one deck before converting the whole machine.
PU is already standard on Stack Sizers. The machines are designed for polyurethane media, so replacement is an established application rather than an experiment.
Compatibility is more than panel size. Edge profile, tensioning direction and fixing points determine whether a panel seats correctly.
Aperture specification is a separate check. A panel that fits physically can still change cut size or reduce effective open area.
Polyurethane properties matter. Formulation and hardness should match mineral abrasiveness, feed size, slurry temperature and water chemistry.
Modification is often unnecessary when the panel is manufactured to the existing interface, but must be confirmed per machine.
Trial before full conversion. One deck, comparable feed, defined indicators and cost per tonne as the decision metric.
| Item | Description |
|---|---|
| Function | Replacing existing Stack Sizer screening media with compatible PU panels |
| Material | Polyurethane panels, often with LANXESS raw material and customised specifications |
| Aperture | Micron or mesh size, shape, orientation matched to the required product distribution |
| Application | Fine wet screening in mineral processing, iron ore, copper ore, gold, industrial minerals |
| Service Life | Depends on formulation, feed, deck position and operating conditions |
| Benefits | Alternative procurement, potential service-life improvement, maintained screening performance |
Stack Sizer refers to a multi-deck fine wet screening machine in which several screening surfaces are arranged vertically and tensioned with a drawbolt system.
Replacement compatibility here means the condition in which an alternative PU panel matches the existing deck's dimensions, edge profile, tensioning arrangement and aperture specification sufficiently to install and operate without structural modification.
HT48-30 is the product designation of HTL's PU mesh panel offered for Stack Sizer replacement applications.
Stack Sizer screening media operates under specific mechanical and process conditions, and replacement compatibility depends on matching both.
Mechanical fit. The panel must match deck length, width, thickness and screening-area dimensions. The edge profile must engage the drawbolt tensioning system correctly, in the correct tensioning direction, with fixing points aligned to the deck. A panel that is dimensionally close but has a different hook profile will not tension correctly, and will fail early through movement or edge wear.
Aperture specification. Opening size in microns or mesh, aperture shape and orientation determine the cut size and separation efficiency. Effective open area determines capacity. A replacement panel with a different aperture may fit the deck and still fail the process requirement.
Material properties. Polyurethane formulation and hardness determine wear resistance, elasticity and impact absorption. The correct specification depends on mineral abrasiveness, feed particle size, slurry temperature and water chemistry. A general-purpose panel may not suit a severe application, and a heavily filled panel may crack in a high-impact one.
Operational fit. Deck position matters. The top deck of a Stack Sizer typically sees different loading and wear than lower decks. A single panel specification across all decks is not always the best configuration.
Alternative procurement reducing single-source dependency on the original equipment manufacturer.
Potentially improved service life where the replacement formulation suits the application better.
Customised screening specifications matched to the plant's cut size and product distribution.
No structural modification in many cases, when the panel is manufactured to the existing interface.
Maintained screening performance when aperture and open area are matched correctly.
Cost-per-tonne improvement when service life and efficiency gains outweigh price differences.
Iron ore fines screening where fine wet screening and wear resistance both matter.
Copper ore fine screening ahead of classification and flotation.
Gold ore processing where screening efficiency affects downstream recovery.
Industrial minerals where tight cut sizes require precision apertures.
Tailings duty where fine screening and dewatering occur together.
Base metal concentrators using Stack Sizer technology in grinding circuits.
These duties sit between size reduction in CRUSHING and downstream CLASSIFICATION or DEWATERING. A panel change alters the size distribution reaching the next stage.
| Property | PU Panel (HT48-30 type) | Original OEM Polyurethane | Woven Wire Mesh | Rubber Screen Media |
|---|---|---|---|---|
| Stack Sizer compatibility | Specified configurations | Direct fit | Not applicable | Not applicable |
| Abrasion resistance | Good | Good | Moderate | Good–excellent |
| Fine aperture capability | Good | Good | Good | Limited |
| Procurement flexibility | High | Single source | Depends on supplier | Depends on supplier |
| Customisation scope | Broad | Limited | Moderate | Moderate |
| Best application | Fine wet screening replacement | Original equipment | Clean dry fine duty | Coarse impact zones |
| Scenario | Dominant Constraint | Recommended Direction |
|---|---|---|
| OEM panel lead time or price problem | Procurement | Evaluate HT48-30 type PU panel with full specification match |
| Existing panels wearing prematurely | Wear life | Review formulation and deck position before changing supplier |
| Aperture specification not met | Separation | Confirm aperture size in microns, shape and orientation |
| Edge profile differs from original | Mechanical fit | Re-measure hook profile against drawing before ordering |
| Machine previously repaired or modified | Dimensional drift | Verify actual dimensions rather than relying on original drawing |
| Fine cut with tight tolerance | Open area and accuracy | POLYURETHANE FINE SCREEN PANEL evaluation |
| Industry | Typical Material | Stack Sizer Duty | Replacement Priority |
|---|---|---|---|
| Iron ore | Hematite, magnetite fines | Fine screening ahead of classification | Wear life and aperture match |
| Copper | Copper ore fines | Grinding circuit classification | Efficiency and open area |
| Gold | Gold ore fines | Pre-concentration and classification | Cut size accuracy |
| Coal | Coal fines | Desliming and preparation | Wet handling and blinding |
| Industrial minerals |
Pub Czas : 2026-11-17 09:09:51
>> lista aktualności
Szczegóły kontaktu
TOGETHER HTL LTD
Osoba kontaktowa: Mr. Maple Tel: +86 17778255675 Faks: 86--311-80690567 |